Basic InfoModel NO.:XDK-E8604TType:Epon Optical Line TerminalWiring Devices:Optical Cable.Port:4 Pon PortDistance:up to 20kmDba:SupportPoint to Multi Point:YesTransmission Speed:Downstream 1.25GPS, Upstream: 1.25GPSManagement:User Friendly Gui ManagementONU Capacity:256 Onus MaximumQos:SupportVllan:SupportAccess Control List:SupportTrademark:HiOSOSpecification:CE FCC ROHSOrigin:ChinaHS Code:8544700000 High-Performance Cabinet OLT----- E8604TIntroductionE8604T complies with IEEE802.3ah and P. R. C intercommunication standard, YD/T 1475-2006, supports CTC20/2.1, automatically discovers and cooperates with ONUs of different manufacturers. E8604T OLT supports the symmetric uplink/downlink 1.25Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users. Its coupling ratio, 1: 64, and its support of different hybrid ONU networks minimize the carrier's investment. E8604T has strong functions and QoS guarantee, and supports SLA and DBA. Main AdvantagesE8604T is an optical network device series that is suitable for the current market; One E8604T supports up to four EPON systems, so it has the following advantages: EPON: E8604T supports IEEE802.3ah and PRC Community Industry Standard (YD/T 1475-2006). System's capacity: The modularized PON card of E8604T can support one to four EPON systems simultaneously, up to 256 ONUs and the 1/64 coupling ratio. Uplink interface: Its flexible design supports various MAN interface type groups. The optical ports or the electrical ports are selected according to network conditions. Device size: A 1U device occupies a little space and consumes little power, decreasing the function cost of the services. Protecting the bus optical fiber: E8604T supports that the link can be automatically switched to protect the optical fiber when trouble occurs in the optical fiber. It is highly reliable and powered by two power sources. Main Characteristics It adopts the point-to-multipoint network topology, effectively collects separate Ethernet services and aggregates them on the MAN node. It connects the upper-layer devices through the GE interface and can be connected to the existing network smoothly. The Dynamic Bandwidth Allocation (DBA) mechanism enables all users to share the 1Gbps bandwidth reasonably, guaranteeing a reliable QoS. The Rapid Spanning Tree Protocol (RSTP) enables the redundant interconnection between OLT and backbone network. They support the IGMP multicast and efficiently utilize the bandwidth. They support the multicast VLAN. It supports the broadcast of IPTV, voice and data simultaneously. It has rich OAM functions such as configuration, alarm, performance monitoring, trouble isolation and security management. At the same time, it supports the CLI/GUI management, which is easy to use. Attributes E8604T System's capacity Maximum coupling ratio, 1:64 32G backplane bandwidth Interface 6 GE ports (2 gigabit RJ45 ports, 2 combo ports, 2 gigabit optical ports) 4 fixed EPON ports PON interface A 1Gbps transmission rate with downlink and uplink symmetry Average luminous power on the PON port: +2dbm ~ +7dbm Optical acceptance senitivity of the PON port: not less than -30dBm Security: ONU authentication mechanism Network coverage diameter: 30 kilometers Standard IEEE802.3ah IEEE 802.1D, Spanning Tree IEEE 802.1Q, VLAN IEEE 802.1w, RSTP IEEE 802.3ad physical link static/dynamic aggregation (LACP) Ethernet –II, Ethernet-SNAP IEEE 802.3ad  VLAN Stacking( Q in Q) L3 functions Supporting static route QoS Backpressure flow control (half duplex) IEEE 802.3x flow control (full duplex) IEEE p802.1p, CoS WR, SP and FIFO Supporting the Mark/Remark priority of 802.1P/DSCP Limiting the uplink/downlink rate based on each ONU Supporting DBA and SLA VLAN Port-based VLAN GVRP IEEE802.1Q VLAN relay Supporting QinQ and flexible QinQ Multicast IGMP v1/v2/v3 IGMP Snooping Multicast VLAN and limited multicast Reliability Unidirectional Link Detection (UDLD) Hot swap of the EPON optical module on the expanded slot EAPS fast loopback protection function Optical path protection of EPON Network security Limiting the maximum number of users on each port Port isolation Controlling the storm of packets Flow-based ACL access control function Transmission data encryption on the PON interface Configuration management Various management modes such as CLI, Web, SNMP, TELNET and cluster RMONv1, group 1, group 2, group 3 and group 9 SSHv1/v2 Upgrading the software and the bootrom through TFTP and FTP Local or the server's syslog logs Command prompt in English or in Chinese Network testing tools such as ping and traceroute Debug output Physical Characters 442mm(W) x315mm(D) x 44mm(H) Installation: A 19-inch cabinet Weight: 2kg Environment requirements Working condition:  10%-85% no condensation Storage condition:  5%-95%; no condensation  Power Source Input voltage: AC100-240V Input frequency: 47-63Hz Supporting power input from two power sources Input current: 1A/230V Power consumption: Up to 40WProduct Description